# Problem with firmware version 1.6.9 and starting/stopping of activities

**URL:** <https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463>\
**Category:** General\
**Created:** [February 7, 2024, 8:20am UTC](https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463 "2024-02-07T08:20:44Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sturgis](https://unfolded.community/letter_avatar_proxy/v4/letter/s/f475e1/32.png) [@Sturgis](https://unfolded.community/u/Sturgis)\
**Post date:** [February 7, 2024, 8:20am UTC](https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463/1 "2024-02-07T08:20:44Z")

</div>

With the latest firmware update 1.6.9, I have the problem that when starting an activity, the display of the steps of the start sequence stops at the last step, continues to be displayed and thus the UI of the activity is not displayed. To fix this, I have to exit the activity and start it again. The same happens when exiting an activity when the off sequence is run through.

---

<div class="post-metadata">

**Author:** ![davoque](https://unfolded.community/letter_avatar_proxy/v4/letter/d/f9ae1b/32.png) [@davoque](https://unfolded.community/u/davoque)\
**Post date:** [February 7, 2024, 9:21am UTC](https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463/2 "2024-02-07T09:21:11Z")

</div>

Bug has been loaded by kennymc.c

> <https://github.com/unfoldedcircle/feature-and-bug-tracker/issues/311>
>
> \### Is there an existing issue for this?
> 
> \- \[X\] I have searched the existing iss…ues
> 
> \### Description
> 
> After installing the 1.6.9 update on and off sequences of activities getting stuck at either the first or last step. The overlay doesn't disappear and you have to press the back or home button to get back to the profile pages. Sometimes the activity state has changed to error after that. After starting the activity again it works without errors. All commands including the command where the sequence stops are executed but everything after that will not be executed.
> 
> \### How to Reproduce
> 
> 1. Start or stop an activity
> 
> \### Expected behavior
> 
> The on sequence should finish without errors
> 
> \### System version
> 
> 1.6.9
> 
> \### What part of the system affected by the problem?
> 
> UI
> 
> \### Additional context
> 
> \_No response\_

---

<div class="post-metadata">

**Author:** ![Engel07](https://unfolded.community/letter_avatar_proxy/v4/letter/e/e495f1/32.png) [@Engel07](https://unfolded.community/u/Engel07)\
**Post date:** [February 7, 2024, 10:13am UTC](https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463/3 "2024-02-07T10:13:34Z")

</div>

Same here. I’ve found out that the “back” button clears the screen and let you use the remote normally

---

<div class="post-metadata">

**Author:** ![Sturgis](https://unfolded.community/letter_avatar_proxy/v4/letter/s/f475e1/32.png) [@Sturgis](https://unfolded.community/u/Sturgis)\
**Post date:** [February 7, 2024, 10:25am UTC](https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463/4 "2024-02-07T10:25:28Z")

</div>

Regarding the problem with firmware 1.6.9 may I ask if there is a way to go back to firmware 1.6.7 again?

---

<div class="post-metadata">

**Author:** ![Sturgis](https://unfolded.community/letter_avatar_proxy/v4/letter/s/f475e1/32.png) [@Sturgis](https://unfolded.community/u/Sturgis)\
**Post date:** [February 7, 2024, 11:58am UTC](https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463/5 "2024-02-07T11:58:38Z")

</div>

zehnm commented on github that a new release is being built and should be available later today. 🙏

---

<div class="post-metadata">

**Author:** ![Sturgis](https://unfolded.community/letter_avatar_proxy/v4/letter/s/f475e1/32.png) [@Sturgis](https://unfolded.community/u/Sturgis)\
**Post date:** [February 7, 2024, 12:45pm UTC](https://unfolded.community/t/problem-with-firmware-version-1-6-9-and-starting-stopping-of-activities/1463/6 "2024-02-07T12:45:08Z")

</div>

New firmware 1.6.10 solved the problem of activity loading stuck for me. Thanks for the fast response to the UC-Team! 🙏
