# Anthem AV Integration

**URL:** <https://unfolded.community/t/anthem-av-integration/4645>\
**Category:** General\
**Tags:** integration\
**Created:** [November 23, 2025, 3:02pm UTC](https://unfolded.community/t/anthem-av-integration/4645 "2025-11-23T15:02:46Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 6, 2026, 2:48pm UTC](https://unfolded.community/t/anthem-av-integration/4645/21 "2026-02-06T14:48:05Z")

</div>

that does make sense if the command is different, that being said since i cant test myself. do me a favor, load it up via tar.gz and not docker, test again and confirm if volume doesnt work for your model, then share the logs so i can see what happens in the backend. your logic is sound but sicne i cant test anything i will need to see the behavior.

---

<div class="post-metadata">

**Author:** ![kalika](https://unfolded.community/letter_avatar_proxy/v4/letter/k/bbce88/32.png) [@kalika](https://unfolded.community/u/kalika)\
**Post date:** [February 7, 2026, 4:14pm UTC](https://unfolded.community/t/anthem-av-integration/4645/22 "2026-02-07T16:14:43Z")

</div>

OK. I loaded the tar.gz for 1.4.16 on the remote (running firmware v2.8.3). I rebooted. Ran an activity that turns on my MRX720, tried sending the integration’s volume up (3x) and down (3x). Here is the log for core services and the Anthem integration. I hope it helps!

> <https://pastebin.com/j2cxUmGN>

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 7, 2026, 4:27pm UTC](https://unfolded.community/t/anthem-av-integration/4645/23 "2026-02-07T16:27:56Z")

</div>

redo and downlonad ONLY the anthem integration log, not the core logs. you can do as such by choosing from the dropdown ONLY the anthem log.

---

<div class="post-metadata">

**Author:** ![kalika](https://unfolded.community/letter_avatar_proxy/v4/letter/k/bbce88/32.png) [@kalika](https://unfolded.community/u/kalika)\
**Post date:** [February 7, 2026, 4:33pm UTC](https://unfolded.community/t/anthem-av-integration/4645/24 "2026-02-07T16:33:15Z")

</div>

OK. Here’s a new dump of just the Anthem log:

> <https://pastebin.com/kTXVGqPr>

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 7, 2026, 4:48pm UTC](https://unfolded.community/t/anthem-av-integration/4645/25 "2026-02-07T16:48:32Z")

</div>

somrthing is off, i see we getting 200 from ur device meaning it did in fact sent success for volume up

| 2026-02-07 16:04:59.733493 +00:00 | custom-intg-anthemav | INFO | 2026-02-07 09:04:59,732 - ucapi.api - DEBUG - [(‘127.0.0.1’, 33050)] \<-: {kind:req,id:11,msg:entity\_command,msg\_data:{cmd\_id:volume\_up,entity\_id:media\_player.anthem\_192\_168\_3\_90\_14999,entity\_type:media\_player}} |
| --- | --- | --- | --- |
| 2026-02-07 16:04:57.543397 +00:00 | custom-intg-anthemav | INFO | 2026-02-07 09:04:57,542 - ucapi.api - DEBUG - [(‘127.0.0.1’, 33050)] -\>: {‘kind’: ‘resp’, ‘req\_id’: 10, ‘code’: 200, ‘msg’: ‘result’, ‘msg\_data’: {}} |
| 2026-02-07 16:04:57.542931 +00:00 | custom-intg-anthemav | INFO | 2026-02-07 09:04:57,541 - uc\_intg\_anthemav.media\_player - INFO - [media\_player.anthem\_192\_168\_3\_90\_14999] Command: volume\_up |

which entity u using to use volume, is it inside an activity? outside an activity? from logs it show working

---

<div class="post-metadata">

**Author:** ![kalika](https://unfolded.community/letter_avatar_proxy/v4/letter/k/bbce88/32.png) [@kalika](https://unfolded.community/u/kalika)\
**Post date:** [February 7, 2026, 5:04pm UTC](https://unfolded.community/t/anthem-av-integration/4645/26 "2026-02-07T17:04:18Z")

</div>

Interesting. I’m not sure I’m following your question, but I have the MRX720 media player entity assigned to several activities. This example sent the volume commands from the media player inside an activity.

I honestly don’t know how to access the commands from outside an activity. Is that an experiment I should try?

For what it’s worth… The reason I asked about the formatting, is that I have the volume control working for both models (MRX/AVM) through the text over TCP integration, and use the two different formats for each.

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 7, 2026, 5:40pm UTC](https://unfolded.community/t/anthem-av-integration/4645/27 "2026-02-07T17:40:41Z")

</div>

> [@kalika](#):
>
> MRX720 Zone 1 Volume Up/Down = Z1VUP01/Z1VDN01
> 
> AVM90 Zone 1 Volume Up/Down = Z1VUP/Z1VDN

working on a fix.

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 7, 2026, 5:49pm UTC](https://unfolded.community/t/anthem-av-integration/4645/28 "2026-02-07T17:49:51Z")

</div>

try the latest version

---

<div class="post-metadata">

**Author:** ![kalika](https://unfolded.community/letter_avatar_proxy/v4/letter/k/bbce88/32.png) [@kalika](https://unfolded.community/u/kalika)\
**Post date:** [February 7, 2026, 6:04pm UTC](https://unfolded.community/t/anthem-av-integration/4645/29 "2026-02-07T18:04:18Z")

</div>

That was fast! Loaded up and working perfectly. Thanks!

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 7, 2026, 6:05pm UTC](https://unfolded.community/t/anthem-av-integration/4645/30 "2026-02-07T18:05:00Z")

</div>

Enjoy. dont forget to hit that like and subscribe button to show your support LMAO

---

<div class="post-metadata">

**Author:** ![manchot](https://unfolded.community/letter_avatar_proxy/v4/letter/m/b9bd4f/32.png) [@manchot](https://unfolded.community/u/manchot)\
**Post date:** [February 12, 2026, 1:14pm UTC](https://unfolded.community/t/anthem-av-integration/4645/31 "2026-02-12T13:14:44Z")

</div>

Thanks for this Anthem integration - much appreciated! I am using it with my Anthem MRX 1120 and it works fine, except for one thing.

When I run the start sequence of an activity it fails to set/change the Anthem input. In contrast, setting the input manually from the remote works fine.

Is this a known problem or should I submit the logs?

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 12, 2026, 2:01pm UTC](https://unfolded.community/t/anthem-av-integration/4645/32 "2026-02-12T14:01:22Z")

</div>

in my honest opinion it is most likely something wrong with how you set it up. it works for others, you need to provide a lot more details, screenshots and explanation of what you are trying to do step by step. the fact it works outside of an activity prove its a config error and not an integration error (i hope). The reason for a lot more details is due to:

“This is another blind integration, therefore i cannot test/replicate/validate.  
any issue will require explicit problem statement and logs for further debug.”

---

<div class="post-metadata">

**Author:** ![fbutler](https://unfolded.community/letter_avatar_proxy/v4/letter/f/4491bb/32.png) [@fbutler](https://unfolded.community/u/fbutler)\
**Post date:** [February 12, 2026, 5:05pm UTC](https://unfolded.community/t/anthem-av-integration/4645/33 "2026-02-12T17:05:25Z")

</div>

Have you tried adding a delay before you set the input in the start sequence?

---

<div class="post-metadata">

**Author:** ![manchot](https://unfolded.community/letter_avatar_proxy/v4/letter/m/b9bd4f/32.png) [@manchot](https://unfolded.community/u/manchot)\
**Post date:** [February 12, 2026, 5:22pm UTC](https://unfolded.community/t/anthem-av-integration/4645/34 "2026-02-12T17:22:20Z")

</div>

I have, but it makes no difference - tried 1-5 secs.

Will now delete the Anthem entity and integration and reinstall. Hope it works then!

---

<div class="post-metadata">

**Author:** ![manchot](https://unfolded.community/letter_avatar_proxy/v4/letter/m/b9bd4f/32.png) [@manchot](https://unfolded.community/u/manchot)\
**Post date:** [February 13, 2026, 5:38pm UTC](https://unfolded.community/t/anthem-av-integration/4645/35 "2026-02-13T17:38:09Z")

</div>

Here are the Anthem integration logs for an activity that does nothing but turn on the Anthem and setting its input to HDMI 2.

2026-02-13 17:27:21.521103 +00:00 custom-intg-anthemav INFO 2026-02-13 18:27:21,520 - ucapi.api - DEBUG - [(‘127.0.0.1’, 47998)] -\>: {‘kind’: ‘resp’, ‘req\_id’: 57, ‘code’: 200, ‘msg’: ‘result’, ‘msg\_data’: {}}  
2026-02-13 17:27:21.520273 +00:00 custom-intg-anthemav INFO 2026-02-13 18:27:21,518 - uc\_intg\_anthemav.media\_player - INFO - [media\_player.anthem\_192\_168\_1\_64\_14999] Command: select\_source {‘source’: ‘HDMI 2’}  
2026-02-13 17:27:21.520273 +00:00 custom-intg-anthemav INFO 2026-02-13 18:27:21,517 - ucapi.api - DEBUG - [(‘127.0.0.1’, 47998)] \<-: {“kind”:“req”,“id”:57,“msg”:“entity\_command”,“msg\_data”:{“cmd\_id”:“select\_source”,“entity\_id”:“media\_player.anthem\_192\_168\_1\_64\_14999”,“entity\_type”:“media\_player”,“params”:{“source”:“HDMI 2”}}}  
2026-02-13 17:27:21.516071 +00:00 custom-intg-anthemav INFO 2026-02-13 18:27:21,512 - ucapi.api - DEBUG - [(‘127.0.0.1’, 47998)] -\>: {‘kind’: ‘resp’, ‘req\_id’: 56, ‘code’: 200, ‘msg’: ‘result’, ‘msg\_data’: {}}  
2026-02-13 17:27:21.510562 +00:00 custom-intg-anthemav INFO 2026-02-13 18:27:21,509 - uc\_intg\_anthemav.media\_player - INFO - [media\_player.anthem\_192\_168\_1\_64\_14999] Command: on  
2026-02-13 17:27:21.510562 +00:00 custom-intg-anthemav INFO 2026-02-13 18:27:21,507 - ucapi.api - DEBUG - [(‘127.0.0.1’, 47998)] \<-: {“kind”:“req”,“id”:56,“msg”:“entity\_command”,“msg\_data”:{“cmd\_id”:“on”,“entity\_id”:“media\_player.anthem\_192\_168\_1\_64\_14999”,“entity\_type”:“media\_player”,“params”:{}}}

Before running the start sequence of this activity the Anthem input was set to HDMI 1, and starting the activity did not change it to HDMI 2.

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 13, 2026, 6:10pm UTC](https://unfolded.community/t/anthem-av-integration/4645/36 "2026-02-13T18:10:48Z")

</div>

1. Show screenshots of your activity setup
2. Disable any HDMI-CEC or HDMI controls by/in the devices in the activity.
3. Share full log (not in raw, post on pastebin or uplaod the file)

---

<div class="post-metadata">

**Author:** ![manchot](https://unfolded.community/letter_avatar_proxy/v4/letter/m/b9bd4f/32.png) [@manchot](https://unfolded.community/u/manchot)\
**Post date:** [February 15, 2026, 10:08am UTC](https://unfolded.community/t/anthem-av-integration/4645/37 "2026-02-15T10:08:33Z")

</div>

I did some more experimenting and it turns out that my Anthem device needs a delay of no less than six seconds after power on before its input source can be changed. This was causing my problem. After inserting such a delay in my on sequences everything works perfectly. Sorry for the confusion.

---

<div class="post-metadata">

**Author:** ![M.a.S.e](https://unfolded.community/user_avatar/unfolded.community/m.a.s.e/32/820_2.png) [@M.a.S.e](https://unfolded.community/u/M.a.S.e)\
**Post date:** [February 15, 2026, 11:19pm UTC](https://unfolded.community/t/anthem-av-integration/4645/38 "2026-02-15T23:19:27Z")

</div>

Glad you were able to figure it out. Even more glad it’s not a problem with my integration lol

---

<div class="post-metadata">

**Author:** ![manchot](https://unfolded.community/letter_avatar_proxy/v4/letter/m/b9bd4f/32.png) [@manchot](https://unfolded.community/u/manchot)\
**Post date:** [February 16, 2026, 8:48am UTC](https://unfolded.community/t/anthem-av-integration/4645/39 "2026-02-16T08:48:48Z")

</div>

I know the feeling! Once again thanks for the integration.

---

<div class="post-metadata">

**Author:** ![Vasiliy](https://unfolded.community/letter_avatar_proxy/v4/letter/v/ee7513/32.png) [@Vasiliy](https://unfolded.community/u/Vasiliy)\
**Post date:** [February 19, 2026, 11:30am UTC](https://unfolded.community/t/anthem-av-integration/4645/40 "2026-02-19T11:30:38Z")

</div>

Hello. My IP control app didn’t work. I installed the app and entered the IP address and port. All device control settings appeared in the UC remote control, but none of them are active. What am I doing wrong? I have an Anthem AVM90 AV processor.

[Previous page](https://unfolded.community/t/anthem-av-integration/4645.md?page=1)

[Next page](https://unfolded.community/t/anthem-av-integration/4645.md?page=3)